ENGINE TYPE
In-line 6 cylinder 4 stroke, 24 valve, turbocharged inter-cooled Mack® diesel engine

RATINGS
Daytona DME-7-450 rated 450 HP @ 2100 RPM
Daytona DME-7-600 rated 600 HP @ 2300 RPM
Daytona DME-7-720 rated 720 HP @ 2400 RPM

BORE/STROKE
4.87 ins. x 6.5 ins.

DISPLACEMENT CAPACITY
728 cubic inches: 12 liter

COMPRESSION RATIO
15.5:1

FUEL SYSTEM
Direct injection Bosch in-line pump with boost control. Plunger type lift pump and final fuel filtration. Governor mechanical type, integral with injection pump

OIL CAPACITY
Full flow twin spin-on filters 28 U.S. Quarts: 26.5 liters

TURBOCHARGER
Garrett Turbocharger with patented multi-pass intercooler

RAW WATER SYSTEM
Gear driven JABSCO raw water pump coupled with 316L stainless steel tubing and components

FRESH WATER COOLING SYSTEM
Centrifugal type rotor pump; stainless steel heat exchanger and components

ELECTRICAL SYSTEM
12 volt is standard/95 amp alternator System provides overheat, low oil pressure warning sensors

ENGINE MOUNTS
4 in-line adjustable high grade anti-vibration point mounting with transmission

POWER-TO-WEIGHT RATIO (lbs/HP)
3.19/3.83/5.11

DRY WEIGHT LESS TRANSMISSION
2300 lbs (1046 kgs)

EXHAUST OUTLET
Single water jacketed 316L stainless steel exhaust outlet (8.0")

QUALITY CONTROL TESTING
All engines are fully run on dynamometers before delivery